Description
Charred Frontier Oak & G10 Burner Kit
Be certain that combustible flooring material (i.e.: carpet, tile, etc) is not too close to the vent-free unit. If the vent-free burner system is at floor level or less than 6" above the floor, there MUST be at least 12" of noncombustible material between the front of the fireplace and any combustible flooring.
This burner system is equipped with an Oxygen Depletion Sensor (ODS) safety pilot system. The ODS senses the amount of oxygen available in the room and shuts the burner system off before the oxygen level drops below 18%. The pilot can only be relit when fresh air is available. This may require opening a window or door to another room or cracking the damper open slightly.
G10 Series Vent Free Gas Log Sets are ANSI Certified and Include:
- Vent Free Gas Logs
- Certified Vent Free Burner with pre-assembled Control Valve and ODS Safety System
- Custom Grate
- Connector Kit
- Glowing Embers
- Bryte Coals
- Lava-Fyre Granules
- Manual
- On/Off Remote with Standing Pilot (-12)
- Variable flame height remote with standing pilot (-15)
- Electronic Remote Control (01V)
Additional Information
NOTE: The above sizing may include burners not compatible with this log style or size.
IMPORTANT INFORMATION:
We highly recommend that this log set be purchased with an associated burner from this site. Logs are designed and manufactured to work with the burners listed. We do not warrant any log set if not purchased with a burner system as indicated on this site. As always, please call us with questions at 866-238-9228.
Always check local building codes and city regulations for any restrictions or conditions regarding gas logs before you purchase or install them.
Specifications