Magnificent Inferno Vented Logs
Magnificent Inferno is defined by large two-piece front logs that create an impressive flame/ember viewing area. Thick bark texture and a detailed burned through area add to the realism. The top logs are a combination of charred logs and western pine split logs, the result is a fire that appears an hour or two old, with new wood just added - Hargrove realism!
IMPORTANT NOTE: Hargrove log sets are to be installed by qualified personnel only. Failure to follow these instructions may cause a fire or explosion resulting in property damage, personal injury or loss of life.
Hargrove gas logs are made with refractory materials. Each log is hand-finished to assure the most realistic, detailed log available. The gas log burner system is designed to burn like wood, with a smoky flame. For this reason, the gas log set must be burned only in a fully vented, non-combustible fireplace with the damper completely open and the chimney free of any obstructions or restrictions. The fireplace must be designed and approved to burn wood.
This product is the Logs Only. To view the Gas Logs & Burner Combination, click here.
COMPATIBLE BURNERS FOR THE INFERNO SERIES
E-Burner (Ember Burner/Single Burner) - Natural Gas
The Ember burner is designed to provide years of trouble-free service, and is constructed of heavy, 16 gauge steel, for extra strength and longevity. The single burner tube distributes gas evenly throughout the Ember burner, giving the flames movement as they waft through the pedestal grate and wrap around the logs, convincingly simulating the way real wood burns in a fireplace. Ember Burner accessory kits require a minimum 14" of depth.
Accessory Kits include: Burner Pan, customer 5/8" grate, sand or vermiculite, embers, volcanic cinder, fittings, and a black, non-whistling flex connector.
H-Burner (HB) - Natural Gas
H-Burner accessory kits require a minimum 14.75" of depth
. Accessory kits include: Burner Pan, customer 5/8" grate, sand or vermiculite, embers, volcanic cider, fittings, and a black, non whistling flex connector. The H-Burner is a dual burner that provides a large body of flame and additional flame in front of the logs. The H-Burner expands upon the Ember burner concept by adding a full-length secondary burner tube to the front area of the burner pan. This advancement provides additional flame in front of the logs, which helps radiate more heat into the home while enhancing the look of the log set, and also creates an improved ember bed, particularly in liquid propane applications.
System 4 Burner - Propane
The system 4 burner provides a full bodied flame that provides outstanding performance in liquid propane applications. This burner is recommended for Fresh Cut, Char and Radiant Heat Series Logs. The revolutionary system 4 vented burner system is designed specifically to provide outstanding performance in liquid propane applications. Controlled porting and optimal fuel to air ratios create an extremely clean burning system that provides natural flame patterns and a full glowing ember bed, with much less carbon production than previous liquid propane systems. System 4 features hidden controls, and multiple units may be combined to create a wide range of sizes, as well as see-thru units.
The system 4 burners come with a factory installed safety pilot control or a latch tap pilot with on/off remote control.
BUYING LOGS WITH BURNER KIT? DON'T FORGET TO CHOOSE A CONTROL SYSTEM.
CPE-PO - Safety Pilot Ignition
LCK-RC - On/Off Remote Control Ignition
See Features for details on Control Options